Router Bits & Accessories

Trend Hinge Jig

£226.91

ex. VAT £189.09

The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops...

Trend STAIR/A Staircase Jig

£181.54

ex. VAT £151.28

This Trend STAIR/AStaircase Jig is a template jig with well proven means of routing out stair housings quickly and accurately. It is constructed from...

Trend T-Square

£41.31

ex. VAT £34.42

This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not...

HiKOKI Template Guide for Routers 956934

£7.39

ex. VAT £6.16

Template guide, suitable for Group E1 Routers. Size: 28.5 x 30 x 4mm.

Trend Two Flute Cutter, Extra Long Shank

£30.98

ex. VAT £25.82

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They...

Trend Pocket Hole Jigs

£27.09

ex. VAT £22.57

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes...

Trend Kitchen Worktop Jigs

£108.91

ex. VAT £90.76

The Trend Kitchen Worktop Jig is a hard-wearing solid laminate, 12mm thick jig that enables cutting both parts of the joint in 15 minutes...

Trend Guide Bush

£14.96

ex. VAT £12.47

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.

Trend Bearing Guided Intumescent Strip Cutter

£35.09

ex. VAT £29.24

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip....

Trend CraftPro Two Flute Cutters, 1/2in Shank

£21.87

ex. VAT £18.22

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials....

Trend Biscuit Jointer Set, Craft Pro

£44.23

ex. VAT £36.86

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the...

Trend Bearing Guided Corner Bead, 1/4in Shank

£47.84

ex. VAT £39.87

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at...

Trend Bearing Guided Template Profile Cutter

£24.68

ex. VAT £20.57

Trend Bearing Guided Template Profile Cutter for rebating and trimming edges. Extra care must be taken to avoid breakage of the cutter. Two flute...

Trend 90° Bearing Guided Trimmer Cutter

£23.47

ex. VAT £19.56

Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to...

Trend CraftPro Round Over Two Flute Cutter, 1/4in Shank

£42.21

ex. VAT £35.17

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges....

Trend CraftPro Bearing Guided Ovolo & Round Over

£36.57

ex. VAT £30.47

The Trend CraftPro Bearing Guided Ovolo Round Over Cutter for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail...

Trend CraftPro Two Flute Cutters, 1/4in Shank

£19.74

ex. VAT £16.45

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based...

Trend Replacement Bearings

£11.40

ex. VAT £9.50

Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life...

Trend 9/7 Bearing Guided Corner Bead Cutter

£60.40

ex. VAT £50.33

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be...

Trend Pin Guided Rounding Over Cutter

£51.34

ex. VAT £42.78

Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre...

Trend Collet Sleeves

£18.46

ex. VAT £15.38

Trend collet reduction sleeve, used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as...

Trend Countersinks

£32.54

ex. VAT £27.12

Shell style 90¬¨‚à´ countersink produced from the best grade carbon steel designed to leave a clean cut finish by virtue of their multi-tooth deep...

Trend 90° Shank Mounted Template Profiler

£52.65

ex. VAT £43.87

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters...

Trend 90° Bearing Guided Triple Flute Cutter

£34.44

ex. VAT £28.70

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.

Trend 46/39 Bearing Guided Rebate Set

£78.14

ex. VAT £65.12

Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal...

Trend 45° Bearing Guided Chamfer Cutter

£76.80

ex. VAT £64.00

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered...

Trend 90° Template Profiler

£28.15

ex. VAT £23.46

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications....

Trend Bearing Guided Ovolo & Round Over Cutters

£54.14

ex. VAT £45.12

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard....

Trend TCT Rebater

£63.93

ex. VAT £53.27

These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip).

Trend Intumescent Strip Cutter

£85.93

ex. VAT £71.61

This Trend Intumescent Strip Cutter is for routing the groove for the intumescent strip in a frame or door.An Intumescent strip is used to...

Trend Bearing Guided Biscuit Jointer

£68.21

ex. VAT £56.84

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing...

Trend Two Flute Cutter D-Namic Carbide, 1/4in

£34.44

ex. VAT £28.70

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness...

Trend CraftPro Dovetail Cutter, 1/4in Shank

£21.87

ex. VAT £18.22

Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and...

Trend Two Flute Cutter TCT, 1/4in

£26.02

ex. VAT £21.68

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral...

Trend 24/ Plug Makers

£54.79

ex. VAT £45.66

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.

Trend Radius Cutter

£36.25

ex. VAT £30.21

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk...

trending

Popular Products

Free Delivery*

30,000+ Products

5* Customer Service

DIY & Trade Experts

Free Delivery

30,000 Products

Router Bits & Accessories

Refined by Clear all

.cls-1{fill:#231f20} Brand Clear

.cls-1{fill:#231f20} Product Type Clear

Recently Viewed Products

Featured Brands

Your basket

Brand Clear

Product Type Clear