Router Bits

Trend Two Flute Cutter, Extra Long Shank

£30.98

ex. VAT £25.82

Trend Trade range two flute router cutters have extra long shanks and are designed to meet the demanding needs of the professional trademen. They...

Trend Bearing Guided Intumescent Strip Cutter

£36.71

ex. VAT £30.59

Trend CraftPro Intumescent Strip Cutter cuts the perfect sized slot into door edges and door frames for fast, perfectly flush fitting of intumescent strip....

Trend CraftPro Two Flute Cutters, 1/2in Shank

£30.95

ex. VAT £25.79

Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials....

Trend Biscuit Jointer Set, Craft Pro

£44.23

ex. VAT £36.86

This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the...

Trend Bearing Guided Corner Bead, 1/4in Shank

£47.84

ex. VAT £39.87

Trend Craft Pro Bearing Guided Corner Bead for attractive edge moulds. A full corner bead can be produced by making a second pass at...

Trend CraftPro Two Flute Cutters, 1/4in Shank

£19.74

ex. VAT £16.45

The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based...

Trend Replacement Bearings

£11.40

ex. VAT £9.50

Replacement bearing to suit all Trend bearing guided router cutters. The Bearings are shielded to prevent penetration of dust and grease packed for life...

Trend 9/7 Bearing Guided Corner Bead Cutter

£60.40

ex. VAT £50.33

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be...

Trend Pin Guided Rounding Over Cutter

£51.34

ex. VAT £42.78

Pin guided rounding over cutters are ideal for panel work and edge mounting, all can be used on natural timbers, man-made particles and fibre...

Trend 90° Shank Mounted Template Profiler

£52.65

ex. VAT £43.87

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters...

Trend 90° Bearing Guided Triple Flute Cutter

£34.44

ex. VAT £28.70

Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.

Trend 46/39 Bearing Guided Rebate Set

£78.14

ex. VAT £65.12

Popular rebate sets which include different size bearings for a choice of rebates. They provide easy setting up and accurate depth of cut. Ideal...

Trend 45° Bearing Guided Chamfer Cutter

£76.80

ex. VAT £64.00

These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered...

Trend 90° Template Profiler

£28.15

ex. VAT £23.46

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications....

Trend Bearing Guided Ovolo & Round Over Cutters

£54.14

ex. VAT £45.12

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard....

Trend TCT Rebater

£58.29

ex. VAT £48.57

These Cutters produce recesses with a lower rebate - double rebate. Designed to accept library/bookcase strip (Tonk Strip).

Trend Intumescent Strip Cutter

£85.93

ex. VAT £71.61

This Trend Intumescent Strip Cutter is for routing the groove for the intumescent strip in a frame or door.An Intumescent strip is used to...

Trend Bearing Guided Biscuit Jointer

£68.21

ex. VAT £56.84

342 Biscuit jointer set enables biscuit jointing with timber, man-made fibre and particle board with the router. The set includes three sizes of bearing...

Trend Two Flute Cutter D-Namic Carbide, 1/4in

£34.44

ex. VAT £28.70

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness...

Trend CraftPro Dovetail Cutter, 1/4in Shank

£21.87

ex. VAT £18.22

Trend Craft Pro Dovetail Cutters are designed for use with commercial dovetailing and stair housing jigs. They are also used to produce sliding and...

Trend Two Flute Cutter TCT, 1/4in

£26.02

ex. VAT £21.68

The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral...

Trend 24/ Plug Makers

£54.79

ex. VAT £45.66

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min.

Trend Radius Cutter

£36.25

ex. VAT £30.21

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk...

Trend 45° Chamfer V-Groove Cutter

£33.77

ex. VAT £28.14

Chamfer V-grooving cutters are used for bevelling, chamfering and producing mortar grooves. Due to design, an approx. 1.0 mm flat will be found on...

Trend CraftPro Round Over Two Flute Cutter, 1/4in Shank

£35.28

ex. VAT £29.40

The Trend CraftPro Round Over Cutter leaves perfect, superfine, round over detail for a contemporary, eased edge arris profile on straight and curved edges....

Trend 90° Shank Mounted Template Profiler

£79.83

ex. VAT £66.52

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters...

Trend Single Flute Cutter TCT, 1/4in

£31.13

ex. VAT £25.94

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two...

Faithfull Straight Cutter, Two Flute, 1/2in

£14.02

ex. VAT £11.68

The manufacturing specification for Faithfull router bit cutters ensures that they are suitable for use by all professional tradesmen, craftsmen and conscientious DIY enthusiasts....

Trend TR35 x 1/4 TCT Biscuit Jointer Set 4.0 x 37.2mm

£65.20

ex. VAT £54.33

The Trend TR35 Biscuit Jointer Set enables biscuit jointing with timber, man-made fibre and particle board. The right choice of bearing will ensure the...

Trend TR28 x 1/2 TCT Bearing Guided Trimmer 12.7 x 50mm

£58.58

ex. VAT £48.82

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lipping‚Äö√Ñ√¥s and plastic laminate edges. Features...

Trend T421/35 x 1/4 TCT Hinge Sinking Bit 35mm Diameter

£37.86

ex. VAT £31.55

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular...

Trend S3/21 x 1/4 Solid Two Flute Cutter 6.3 x 28mm

£60.49

ex. VAT £50.41

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest...

Trend RT/11M x 1/2 TC Straight Blade Rota-Tip 12.7mm x 89mm

£88.83

ex. VAT £74.02

The Trend Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of tungsten carbide...

Trend RB/B Replacement Blade

£16.97

ex. VAT £14.14

The Trend RB/B is a spare Replacment solid carbide Rota-Tip Blade to suit Rota Tip Cutters. Specifications: Length. 49.5mm.Width. 12mm.Thickness:1.5mm.Holes: 2.Hole Diameter: 4mm.Hole Centers:...

Trend RB/A Replacement Blades (Pack 10)

£99.43

ex. VAT £82.86

The Trend RB/A/10 Replacement Blades are high quality solid carbide replacement cutters for Trend RT/04, RT/05, RT/06, RT/07, RT/08, RT/10, RT11, RT/11M, RT/15, RT/16,...

Trend CR/KFP/5 Kitchen Fitters Set, 5 Piece

£130.27

ex. VAT £108.56

The Trend CR/KFP/5 Kitchen Fitters Set contains 5 x C153DX1/2TC CraftPro Two Flute Cutters. The C153DX1/2TC CraftPro Two Flute Cutter is suitable for routing...

trending

Popular Products

Free Delivery*

30,000+ Products

5* Customer Service

DIY & Trade Experts

Free Delivery

30,000 Products

Router Bits

Refined by Clear all

.cls-1{fill:#231f20} Brand Clear

.cls-1{fill:#231f20} Product Type Clear

Recently Viewed Products

Featured Brands

Your basket

Brand Clear

Product Type Clear